Faculty Department

Dr. Jitendra Yadav, Associate Professor

Dr. Jitendra Yadav

Associate Professor

HSC-M.P Board, Govt. School, Kasrawad, 1993

HSSC-M.P Board, Govt. School, Kasrawad, 1995

B.E.-Mechanical Engineering, DAVV, Indore, 1996-2000

PhD- Mechanical Engineering  , MANIT, Bhopal, 2012-2016

Area of Specialization:

Mechanical vibration, Friction induced stick-slip phenomenon Modeling and simulation, Design and tribology

Career Graph:

  • Associate Prof: University of petroleum and energy studies, Dehradun (UK) from July 2020 till date.
  • Assistant Professor (SG/SS): University of petroleum and energy studies, Dehradun (UK) from July 2014 to June 2020
  • Assistant Professor: ITM University, Gwalior (MP) from Sep 2010 to June 2014
  • Associate Prof: Alpine Institute of Technology, Ujjain (MP) from March 2010 to Sep 20
  • Assistant Professor: Jawaharlal Institute of Technology, Borawan (MP) from Jan 2009 to March 2010
  • Lecturer: Jawaharlal Institute of Technology, Borawan (MP) from Feb 2001 to Dec 2010.

Recent Publications:

  • Yadav, Jitendra, Santosh Kumar Kurre, and Shubham Thakur. "Estimation of the dynamic response of roll cage under impact loading by modelling and simulation." Materials Today: Proceedings (2021).
  • Dravid, Shriram, Jitendra Yadav, and Santosh Kumar Kurre. "Comparison of loosening behavior of bolted joints using plain and spring washers with full-threaded and plain shank bolts." Mechanics Based Design of Structures and Machines (2021): 1-19.
  • Yadav, Jitendra, et al. "Nonlinear dynamics of controlled release mechanism under boundary friction." Results in Engineering 11 (2021): 100265.
  • Kumar, Roushan, et al. "Renewable energy adoption: Design, development, and assessment of solar tree for the mountainous region." International Journal of Energy Research (2021).
  • Chouhan, Sanjay, Vivek Singh Kushwah, and Jitendra Yadav. "Two element multi-slotted MIMO antenna for dual band applications using FR-4 material." Materials Today: Proceedings (2021).
  • Dravid, Shriram, Jitendra yadav et al. "Experimental Evaluation of the Performance of Diaphragm Spring Clutch of a Four-Stroke Multi-cylinder Petrol Engine Under Dry Friction Conditions." Intelligent Communication, Control and Devices. Springer, Singapore, 2021. 313-320.
  • Santosh Kumar Kurre,  Jitendra Yadav, Shubham Thakur,” comparative study of the rear and rear side impact on a roll cage using FEM” International Conference on Recent Advances in Design, Materials and Manufacturing (ICRADMM 2020)
  • Jitendra Yadav, Santosh Kumar Kurre, Shubham Thakur,” FEM based impact analysis of roll cage of an all-terrain vehicle” International Conference on Recent Advances in Design, Materials and Manufacturing (ICRADMM 2020)

Research & Publications:

  • Jitendra Yadav & G. Agnihotri, “Proposed Critical Damping for a Spring Mass System to Avoid Stick-Slip” , Springer Journal of the institution of engineers (India): Series C Volume 96, Number 3, PP 331-335, July-September 2015.
  • Jitendra Yadav & G. Agnihotri, “Modeling and simulation of the hydraulic actuator with viscous friction”, International Journal of Advanced Technology in Engineering and Science, Volume No 03, Special Issue No. 01, March 2015.
  • Jitendra Yadav, Nagendra Sohni, Kartikeya Tripathi and Anshul Gangele “An approach to identify and estimate stick-slip phenomenon by modeling and simulation” International journal of engineering research and technology, New Delhi Volume 4, Number 5 (2011).
  • Kartikeya Tripathi, Dr. M.D.Agrawal, Harshverdhan Mishra and Jitendra Yadav, “Sigmoid Function-Based Friction Model for Real-Time Control System like Automated Manual Clutch”. Journal of Mechanical Engineering, Vol 1, No 4 Feb 2009.
  • Jitendra Yadav and K. Tripathi “Modeling & simulation for optimization of viscous damping ratio for a spring-mass-damper system for circumventing stick-slip” IIIE-Journal, Indian Institution of Industrial Engineering Mumbai

Book Chapters:

  • Yadav J., Pitta P., Maan A. Swing Tower of Loader Backhoe Arm for Dynamics and Stress Analysis by Modeling and Simulation. In: Siddiqui N., Tauseef S., Abbasi S., Rangwala A. (eds) Advances in Fire and Process Safety. Springer Transactions in Civil and Environmental Engineering. Springer, Singapore(2018).
  • Maan A., Pitta P., Yadav J. Performance Evaluation of Rectangular Fins by Modeling and Simulations. In: Siddiqui N., Tauseef S., Abbasi S., Rangwala A. (eds) Advances in Fire and Process Safety. Springer Transactions in Civil and Environmental Engineering. Springer, Singapore (2018).
  • Yadav J., Agnihotri G. Circumvention of Friction-Induced Stick-Slip Vibration by Modeling and Simulation. In: Singh R., Choudhury S., Gehlot A. (eds) Intelligent Communication, Control and Devices. Advances in Intelligent Systems and Computing, vol 624. Springer, Singapore(2018).
  • Jitendra Yadav and Geeta Agnihotri), “Modeling and Simulation of the Dynamic Response of a Generic Mechanical Linkage for Control Application Under the Consideration of Nonlinearities Imposed by Friction”, In Springer Proceedings of the International Conference on Nano-electronics, Circuits & Communication Systems, Lecture Notes in Electrical Engineering 403, DOI 10.1007/978-981-10-2999-8_26 (2017)

Conferences:

  • Sanjay Chouhan, Vivek Singh Kushwah, and Jitendra Yadav, “two element multi-slotted mimo antenna for dual band applications using FR-4 material” International Conference on Recent Advances in Design, Materials and Manufacturing (ICRADMM 2020)
  • Santosh Kumar Kurre,  Jitendra Yadav, Shubham Thakur,” comparative study of the rear and rear side impact on a roll cage using FEM” International Conference on Recent Advances in Design, Materials and Manufacturing (ICRADMM 2020)
  • Jitendra Yadav, Santosh Kumar Kurre, Shubham Thakur,” FEM based impact analysis of roll cage of an allterrain vehicle” International Conference on Recent Advances in Design, Materials and Manufacturing (ICRADMM 2020)
  • S Dravid, J Yadav, S K Kurre, A Kumar, R Kumar, Experimental Evaluation of the Performance of Diaphragm Spring Clutch of A Four-Stroke Multi-Cylinder Petrol Engine under Dry Friction Conditions, 4thInternational Conference on Intelligent Communication, Control and Devices - 2020, Year 2020, at UPES, Dehradun.
  • Tripathi K., Mishra H., Yadav J., Bajpai L. “Selection of Control Force Trajectory for Smooth Release of Mechanical Actuators with Boundary Friction”, Tribo- India Conference, IIT Delhi, New Delhi, 11-12 Dec 2009.
  • Kartikeya Tripathi, Harshverdhan Mishra, Jitendra Yadav and Dr. M.D.Agrawal, “Simulation of Dynamic Response of a Second Order Mechanical System with Boundary Friction”. In Proc. 15th ISME Int. Conf. On New Horizons of mechanical Engineering, Rajiv Gandhi Technological University, Bhopal, 18-20 March 2008, Pp 519-525.
  • Kartikeya Tripathi, Jitendra Yadav, Harshverdhan Mishra and Dr. M.D.Agrawal, “Modeling of Dry Friction Characteristics for Computational Simulation of Dynamic System”. In Proc. Int. Conf. On Recent Trends in mechanical Engineering ICRTME, , Ujjain Engineering College, Ujjain.4-6 Oct 2007
  • K.Tripathi, Shriram Dravid, Harshvardhan Mishra and Jitendra Yadav, “Driveline Oscillations in Vehicle Transmission with Dry Clutch”. In proceeding, International conference on Total Engineering, Analysis and Manufacturing Technologies, IISc, Bangalore 22nd  – 24th  September 2008.
  • Jitendra Yadav, K.Tripathi, Harshvardhan Mishra, Shriram Dravid, “Control of Stick-Slip Using Viscous Damper in a Mechanical System with Dry Friction”. In proceeding, International conference on Total Engineering, Analysis and Manufacturing Technologies, IISc, Bangalore 22nd – 24th September 2008.
  • K.Tripathi, Harshvardhan Mishra and Jitendra Yadav, “Dynamic Response of a Mechanical Control Linkage in Presence of Friction”. In proceeding, International conference on Total Engineering, Analysis and Manufacturing Technologies, IISc, Bangalore 22nd – 24th September 2008.
  • Kartikeya Tripathi, Jitendra Yadav, Harshvardhan Mishra and Ashok Atulker, “Release of Pedal Operated Control Mechanism with Boundary Friction”. In proceeding, International conference on Industrial Tribology (ICIT 08) New Delhi, 6-8 Nov 2008.   
  • Harshvardhan Mishra Kartikeya Tripathi, Jitendra Yadav, “Dynamic Behavior of a Mass Dragged with Constant Velocity under Dry Friction Conditions”. International conference on Industrial Tribology (ICIT 08) New Delhi, 6-8 Nov 2008
  • Jitendra Yadav, Kartikeya Tripathi and Harshvardhan Mishra, “Modeling and Simulation of Stick-Slip Phenomenon for a Mass Dragged with Constant Velocity under Dry Friction Conditions”, International conference on Industrial Tribology (ICIT 08) New Delhi, 6-8 Nov 2008

Award & Achievements:

  • Railway board 2nd prize to paper “Proposed Critical Damping for a Spring Mass System to Avoid Stick-Slip” by Institute of engineers in the year 2016.

Patents Filed:

  • Title: Sliding Storage Cabinet cum Door
    Application No: 360577-001
    Year: 2020

Patents Granted:

  • Title: Chainless transmission system for bicycles
    Inventors: Dr. Jitendra Yadav, Surajit Mondal, Dr. Santosh Kurre, Pawan Kumar Yadav, Lakshmi Kaushik, Manohar Bhati,
    Application Number: 329241-001
    Filed on: 2020-05-09
    Granted on: 2020-11-24
    Year: 2020
  • Title: Writing instrument
    Inventors: Dr. Jitendra Yadav, Dr. Ajay Kumar, Shubham Thakur, Rajashree Hazarika, Sayan Saha, Shantanu Mathur, Vaibhav Porwal
    Application Number: 329240-001
    Filed on: 2020-05-09
    Granted on: 2020-11-25
    Patent No: 93226
    Year: 2020
  • Title: Extendable chair cum cloth hanger
    Inventors: Dr. Jitendra Yadav, Santosh Kurre Shubham Thakur Ayush Sinhle Sayan Saha
    Application number: 333093-001
    Filed on: 2020-09-11
    Granted on: 2021-09-13
    Patent No: 104980
    Year: 2020
  • Title: Ladder
    Inventors: Dr. Jitendra Yadav, Surajit Mondal, Dr. Santosh Kurre et. al.
    Application Number: 347558-001
    Filed on: 2021-08-08
    Granted on: 2021-10-08
    Patent No: 103247
    Year: 2021
  • Title: Drive train for electric vehicle
    Inventors: Dr. Jitendra Yadav, Praveen Dagdee et al
    Application Number: 349910-001
    Filed on: 2021-09-21
    Granted on: 2021-11-11
    Patent No: 104601
    Year: 2021
  • Title: Razor
    Inventors: Dr. Jitendra Yadav, Kafeel Khan
    Application No. 351231-001
    Filed on: 2021-10-13
    Granted on: 2021-11-18
    Patent No: 104980
    Year: 2021
  • Title: Almirah cum ladder
    Inventors: Dr. Jitendra Yadav, Santosh Kurre et. al.
    Application Number: 345759-001
    Year: 2022

Patents Published:

  • Title: A Device for generating Voltage via footsteps
    Inventors: Dr. Santosh Kurre, Dr. Jitendra Yadav et. al.
    Application Number: 202111042478
    Filed on: 2021-09-20
    Published on: 2021-12-10
    Year: 2021
  • Title: A hydraulic bending machine for bending of a work piece
    Inventors: Ravinder Singh, Rohan Bakshi, Kunal Hayaran, Ramandeep Singh, Jitendra Yadav, Ajay Kumar Srivastava
    Application Number:  201911016130
    Filed on: 2019-04-24
    Published on: 2019-05-24
    Year: 2019
  • Title: A support stand retrieval system for a two-wheeler vehicle
    Inventors: Dr. Jitendra Yadav, Aman Jain, Akash Jain, Abhinav Bisht
    Application Number: 202011007621
    Filed on: 2020-02-23
    Published on: 2020-03-06
    Year: 2020

Project handled:Dynamic Analysis of loosening of mechanical bolts under various loading conditions and vibrations ’_Grant Rs. 150000_funded by UPES _2020

Professional Memberships/Fellowship:

  • Lifetime Member of ISTE Chapter
  • Lifetime Member of TSI Chapter (student chapter)
  • Reviewer (International journals)

Honours and Achievements:

Railway board 2nd prize to paper, 2016 by Institute of engineers India

Personal interests

  • Meditation
  • Reading book
  • Playing table tennis
  • Spending time in silence