B.Tech Mechatronics Engineering

This program, developed in direct response to industrial demand for engineers with multi-disciplinary skills, is a combination of mechanical, electronics, control, computer and systems design engineering streams. The program allows engineers to design, construct and run factory production lines and automated processes, where they use their skills in computers, micro-controllers, programmable logic controllers, programming, industrial sensors, hydraulic, pneumatic and electric drives, design of mechanical structures and mechanisms and knowledge of manufacturing processes.

time-duration

Duration: 4 years

eligibility

Examination Pathway admissions through UPESEAT (Upto 80% of Seats) :

  • Minimum 60% marks at Higher & Senior Secondary level (10th & 12th)
  • Minimum 60% aggregate in Physics, Chemistry & Mathematics at Senior Secondary level (12th)

Non Examination Pathway – admissions through Board Merit / JEE  Mains Score (Upto 20% of Seats) :

  • For Board Merit : Minimum 80% marks at Higher & Senior Secondary level (10th & 12th) and minimum 80% aggregate in Physics, Chemistry & Mathematics at Senior Secondary level (12th class)
  • For JEE Mains Merit : Minimum 60% marks at Higher & Senior Secondary level (10th & 12th) and minimum 60% aggregate in Physics, Chemistry & Mathematics at Senior Secondary level (12th class). JEE Mains (cut off to be announced after declaration of JEE Mains-2018 result)

Career Prospects

  • Industrial Automation Engineer
  • Automation Design Engineer
  • Control Systems Engineer
  • Robotics Application Engineer
  • Maintenance Engineer for Automation System
  • New Automation Product Developer
Intake : 30 Seats
Semester I  

Subject

  • Physics I
  • Chemistry
  • Mathematics I
  • Design Thinking
  • Environmental Studies
  • Engineering Mechanics
  • Workshop Technology

Practical

  • Engineering Workshop Lab
  • Physics Lab I
  • Chemistry Lab
Semester II  

Subject

  • Physics II
  • Mathematics II
  • English Communication
  • Engineering Graphics
  • Basic Electrical & Electronics
  • Computer Programming

Practical

  • Electrical & Electronics Lab
  • Physics II Lab
  • Computer Programming Lab
Semester III  

Subject

  • Mathematics III
  • OOPs with C++
  • Engineering Thermodynamics
  • Analog and Digital Electronics
  • Electrical Machine
  • Open Elective I

Practical

  • OOPs Lab
  • Engineering Graphics Lab II
  • Electrical Drives and Electronics Lab
Semester IV  

Subject

  • Materials Technology
  • Embedded System
  • Mechanics of Solids
  • Theory of Machine
  • Instrumentation & Control
  • Open Elective II

Practical

  • Materials Testing Lab
  • Embedded System Programming Lab
  • Theory Of Machine Lab
Semester V  

Subject

  • Manufacturing Technology
  • Fluid Mechanics & Machinery
  • Robotics & Control
  • Open Elective III
  • Program Elective I

Practical

  • Manufacturing Technology Lab
  • Fluid Mechanics & Machinery Lab
  • Robotics & Control Lab
  • Minor Project I
  • Program Elective Lab

Program Elective I

  • Power Electronics & Drives
  • Design & Analysis of Algorithm
  • Heat Transfer
Semester VI  

Subject

  • Design of Machine Elements
  • Program Logic Controller & HMI
  • Hydraulics and Pneumatics
  • CAD/CAM
  • Program Elective II

Practical

  • Hydraulics and Pneumatics Lab
  • CAD/CAM Lab
  • PLC & HMI Lab
  • Minor Project II
  • Industrial Visit

Program Elective II

  • Signal & System
  • Advanced Robotics
  • Automotive Mechatronics
Semester VII  

Subject

  • Refrigeration and Air Conditioning
  • CAD/CAM
  • Operation Research
  • Program Elective III

Practical

  • CAD/CAM Lab
  • Refrigeration and Air Conditioning (RAC) Lab
  • Major Project I
  • Summer Internship
  • Comprehensive Viva 

Program Elective III

  • Solar Thermal Technologies
  • Production and Operations Management
  • Finite Element 
Semester VIII  

Subject

  • Automatic Control
  • Program Elective IV
  • Program Elective V

Practical

  • Major Project II

Program Elective IV

  • Power Palnts
  • Air Conditioning System Design
  • Computational Fluid Dynamics

Program Elective V

  • Modeling and Simulation
  • Automobile Engineering
  • Advanced Manufacturing Technology

UPES Engineering Aptitude Test (UPESEAT) followed by Centralized Counseling

Test Dates :
Name of Program Date of Test Time Duration
B.Tech All Streams (UPESEAT))

5th May'18 (Offline)
11th- 13th (Online)

09:30 - 12:30 Hours 3 Hours

Last date to apply for B. Tech exam Category is 20th April'2018.

Admit Card (to be downloaded from UPES website)

On the basis of information in the Application form, admit card of provisionally eligible candidates will be uploaded on the University website www.upes.ac.in on 25th April, 2018. Candidates are required to download the admit card accordingly. The duly completed downloaded admit card with photograph affixed (duly attested) in the space provided will have to be produced at the allotted test center. Candidates without the admit card or card without the photograph will NOT be permitted to take the test.

Scheme of Tests

Sections No.of Questions
Mathematics 50
Physics 50
Chemistry 50
English Language Comprehension 30
Current Affairs Awareness 20
Total no. of Questions 200

The University reserves the right to make changes in curricula, degree requirements, course offerings, student intake and academic regulations or change of location at any time without assigning any reason or prior notice. The said change may apply not only to prospective students but also to those who are already enrolled with the University.

Age Criteria

Only candidates whose date of birth falls on or after October 1, 1996 are eligible to apply for admission. Date of Birth as recorded in the Secondary Education Board/University certificate only will be taken as authentic.

#Upto 20% seats shall be filled through Board Merit / JEE Main Merit category. Incase candidates for such seats are not available; UPES has the right to fill these through UPES Examination. University also reserves the right to conduct further physical (paper pencil test) / online test for admission.

1). Admissions through Board Merit - Minimum 80% marks in class 10th, 80% marks in class 12th and also have an aggregate of 80% in Physics, Chemistry and Maths (PCM) in class 12th.

OR

2). Admissions through JEE Main Merit - Minimum 60% marks in class 10th, 60% marks in class 12th and also have an aggregate of 60% in Physics, Chemistry and Maths (PCM) in class 12th with JEE Main Score (Cut off to be declared after JEE mains Results)

Selection Process : Centralized Counseling through Merit Ranking

Age Criteria

Only candidates whose date of birth falls on or after October 1, 1996 are eligible to apply for admission. Date of Birth as recorded in the Secondary Education Board/University certificate only will be taken as authentic.

#Upto 20% seats shall be filled through Board Merit / JEE Main Merit category. Incase candidates for such seats are not available; UPES has the right to fill these through UPES Examination. University also reserves the right to conduct further physical (paper pencil test) / online test for admission.

comes

100% Scholarship on Tuition Fee


University of Petroleum & Energy Studies offers limited scholarships in some specific programs as decided by the University. The scholarships are awarded purely on academic merit cum means.

Waiving of Tuition Fee partially/fully will be considered for those who are awarded scholarships.

The details of the scholarships would be provided to the students in the student's bulletin given to the students at the time of registration. Award of Scholarships will be decided by the Scholarship Committee & its decision shall be final and binding

25% Concession on Tuition fee

25% Concession on Tuition fee shall be provided only to Uttarakhand bonafide resident students on merit-cum-means basis to be decided by the University subject to fulfilling the following conditions:

Students’ whose gross annual family income is not more than 3 lakh.

Students’ who possess valid ‘Sthai Niwas Praman Patra’ from Uttarakhand state

Should have passed class X & XII level schooling from Uttarakhand. However, this condition may be relaxed for wards of defense personnel subject to producing of posting certificate outside the state issued by competent authority

Fee structure 2018 - 22 is as follows:

1st Sem
Tuition Fee Academic Service Fee Total
92,100 61,400 1,53,500
2nd Sem
Tuition Fee Academic Service Fee Total
92,100 61,400 1,53,500
3rd Sem
Tuition Fee Academic Service Fee Total
101,250 67,500 1,68,750
4th Sem
Tuition Fee Academic Service Fee Total
101,250 67,500 1,68,750
5th Sem
Tuition Fee Academic Service Fee Total
1,11,380 74,245 1,68,750
6th Sem
Tuition Fee Academic Service Fee Total
1,11,380 74,245 1,68,750
7th Sem
Tuition Fee Academic Service Fee Total
122,480 81645 204125
8th Sem
Tuition Fee Academic Service Fee Total
122,480 81645 204125

Testimonials


Subscribe to our newsletter