Dr. Harinandan Kumar

Dr. Harinandan Kumar

Assistant Professor - Senior Scale

 

B.E (Mechanical and Production Engineering), Sathyabama University, Chennai, Tamil Nadu  

Ph.D. Solid Mechanics, National Institute of Technology Rourkela, Odisha

 

Area of Specialization

Solid Mechanics


Research & Publications:-

International Journals-

Harinandan Kumar and M. K. Mishra, “Optimization and Evaluation of Fly Ash Composite Properties for Geotechnical Application” Arab. Journal of Geo-science, Vol. 8, pp. 3713-3726, 2015. (SCI Indexed) (Citation 2)

Harinandan Kumar, Susmita Mishra, M. K. Mishra, A. Parida, “Petrographic Characteristics of Bituminous Coal from Jharia Coalfield India: It’s Implication on Coal Bed Methane Potentiality” Procedia Earth and Planetary Science, Science Direct, Vol. 11, pp. 38-48, 2015. (Scopus Indexed) (Citation 1)

Harinandan Kumar, S. Ravikumar “An approach to CO2 capture technology for Mitigating Global Warming and Climatic Change - An Overview”, DOI: 10.1109/RSTSCC.2010.5712870, IEEE Explore, pp. 364-371, 2010. (Scopus Indexed) (Citation 3)

Harinandan Kumar, M. K. Mishra, and S. Mishra, “3D Modelling of Coal Deformation under Fluid Pressure using COMSOL Multiphysics”, Journal of Engineering Science and Technology Review. Vol. 10, pp. 62-69, 2018. (Scopus Indexed)

Harinandan Kumar, M. K. Mishra, and S. Mishra, “Laboratory Investigation of Gas Permeability and its Impact on CBM Potential”, Journal of Petroleum Exploration and Production Technology, Springer, Vol. 8, pp. 1183-1197, 2018. (Scopus ESCI, SCImago Indexed)

Harinandan Kumar, M. K. Mishra, and S. Mishra, “Effect of Permeability and Geo-mechanical Properties on Coal Matrix During CBM Production – An Overview”, Journal of Engineering Science and Technology Review, Vol. 11, pp. 160-173, 2018. (Scopus Indexed)

Muralidhar Singh M., Harinandan Kumar, K. V. Nagesha, P. Sivaiah, G. Hemath Kumar, Ajay K M, Vijaya G, “Experimental Investigation on Mechanical Properties of Glass Fibers Reinforced Composites”, Silicon, Springer, https://doi.org/10.1007/s12633-019-0078-3, 2019. (SCI Indexed)

Harinandan Kumar, M. K. Mishra, and S. Mishra, “Sorption capacity of Indian coal and its variation with rank parameters”, Journal of Petroleum Exploration and Production Technology, https://doi.org/10.1007/s13202-019-0621-1, 2019. (Scopus ESCI, SCImago Indexed)

Muralidhar Singh M., Harinandan Kumar, G. Hemath Kumar, P. Sivaiah, K. V. Nagesha, Ajay K M, Vijaya G, “Evaluation of Multilayer Thin Film Coatings for Solar Thermal Applications”, Arabian Journal for Science and Engineering. (SCI Indexed) (Accepted)

International Conferences-

Harinandan Kumar, S. Mishra, and M. K. Mishra, “Experimental Evaluation of Geo-mechanical properties of Coal using Sonic Wave Velocity”, International Conference on Advances in Agricultural, Biological & Environmental Sciences, July 22 - 23, London (UK), 2015. [Best Paper Award]

Harinandan Kumar, S. Ravi Kumar, “Keep Working after Sundown by Energy Storage from Solar Power - An Overview”, International Conference, GTEC - 2011. [Best Paper Award]

National Conferences-

Harinandan Kumar, S. Ravi Kumar, “An Innovative Approach to Save Energy in Converting Solar Power to Hydrogen Fuel” National Conference on Trend in Renewable Energy Sources, Applications & Climatic Change, July 23 - 25, 2010. [Best Paper Award]

Harinandan Kumar, S. Ravi Kumar, “A review of FSW Mechanical Property Study of Aluminum Based Composite”, Aagma - 10, NLTPC, Sept. 17 - 18, 2010. [Best Paper Award]

Harinandan Kumar, M. K. Mishra, S. Mishra, K. T. Parida, “Petrographic and Dynamic behaviour of coal for CBM production in Jharia coal field”, National Seminar on Recent Practices and Innovations in Mining Industry, NIT Raipur, Feb 19 - 20, 2016.

Harinandan Kumar, “Review of Experimental studies on Heat Transfer Augmentation”, National Conference on Development in Mechanical Engineering – An Impact on Ecology and Environment, March 09 - 10, 2013.

Harinandan Kumar, “Nitinol: A Smart Material of Advance Technology”, National Conference on Development in Mechanical Engineering – An Impact on Ecology and Environment, March 09 - 10, 2013.

Harinandan Kumar, “Effect of Process parameter of Friction Stir Welding on Macro and Microstructure of dissimilar material – An Overview”, National Conference on Process and Characterization of Materials, Dec. 07 - 08, 2012.

Harinandan KumPatents Published : 07ar, S. Ravikumar, “Metallurgical study in Friction Stir Welding for Aluminum Alloy – An Overview”, National Conference on Recent Trend in Manufacturing and Industrial Engineering, April 09 - 10, 2010.

Harinandan Kumar, S. Ravikumar, “A review of FSW microstructure studies on dissimilar Aluminum Alloys”, National Conference on Emerging Trend in Mechanical Engineering, August 09 - 10, 2010.

Harinandan Kumar, M. K. Mishra, S. Mishra, “Laboratory Investigation of Gas Permeability and its impact on CBM Production”, National Conference on Waste to Energy, Carbon Capture and Storage, August 03 - 05, 2017.

Patents Published : 07

Workshop/Seminar/Training Programme

One day workshop on New Materials and Applications at Sathyabama University, Chennai, September 2010.

One day workshop on Trends in Material Joining Technologies at Sathyabama University, Chennai, September 2011.

Three days workshop on design of experiment: An optimization tool at National Institute of Technology, Rourkela, December 2013.

Three days workshop on Multi-objective Optimization methods and Applications in Manufacturing at National Institute of Technology, Rourkela, June 2014.

Two days workshop on Aesthetics of Scientific Documentation at National Institute of Technology, Rourkela, July 2014.

Five days Executive Training Programme on Best Practice in Coalbed Methane Exploration and Production (ETP: CBM E&P 2010) at Central Institute of Mining and Fuel Research, Dhanbad, Jan. 9-13, 2017.

Three days Exhibition on Research Scholars’ Week at National Institute of Technology, Rourkela, Feb. 21-23, 2017.

Professional Membership

Member of “Institute of Doctors, Engineers and Scientists”, (2186)

Editorial Board Member of “Journal of Autonomous Intelligence”, En-press Publisher LLC., United States

Editorial Board Member of “Journal of Geological Research”, Bilingual Publishing Co., Singapore


Rewards & Recognition
Harinandan Kumar, S. Mishra, and M. K. Mishra, “Experimental Evaluation of Geo-mechanical properties of Coal using Sonic Wave Velocity”, International Conference on Advances in Agricultural, Biological & Environmental Sciences, July 22 - 23, London (UK), 2015. [Best Paper Award]

Harinandan Kumar, S. Ravi Kumar, “Keep Working after Sundown by Energy Storage from Solar Power - An Overview”, International Conference, GTEC - 2011. [Best Paper Award]

Harinandan Kumar, S. Ravi Kumar, “An Innovative Approach to Save Energy in Converting Solar Power to Hydrogen Fuel” National Conference on Trend in Renewable Energy Sources, Applications & Climatic Change, July 23 - 25, 2010. [Best Paper Award]

Harinandan Kumar, S. Ravi Kumar, “A review of FSW Mechanical Property Study of Aluminum Based Composite”, Aagma - 10, NLTPC, Sept. 17 - 18, 2010. [Best Paper Award]

 

Qualification: Ph.D.

Graduation : B.E (Mechanical and Production Engineering), Sathyabama University, Chennai, Tamil Nadu , 2012

Post Graduation NA

Ph.D. Solid Mechanics, National INSTITUTE of Technology Rourkela, Odisha, 2018

Area of Specialization
Solid Mechanics


Research & Publications:-
International Journals-

Harinandan Kumar and M. K. Mishra, “Optimization and Evaluation of Fly Ash Composite Properties for Geotechnical Application” Arab. Journal of Geo-science, Vol. 8, pp. 3713-3726, 2015. (SCI Indexed) (Citation 2)

Harinandan Kumar, Susmita Mishra, M. K. Mishra, A. Parida, “Petrographic Characteristics of Bituminous Coal from Jharia Coalfield India: It’s Implication on Coal Bed Methane Potentiality” Procedia Earth and Planetary Science, Science Direct, Vol. 11, pp. 38-48, 2015. (Scopus Indexed) (Citation 1)

Harinandan Kumar, S. Ravikumar “An approach to CO2 capture technology for Mitigating Global Warming and Climatic Change - An Overview”, DOI: 10.1109/RSTSCC.2010.5712870, IEEE Explore, pp. 364-371, 2010. (Scopus Indexed) (Citation 3)

Harinandan Kumar, M. K. Mishra, and S. Mishra, “3D Modelling of Coal Deformation under Fluid Pressure using COMSOL Multiphysics”, Journal of Engineering Science and Technology Review. Vol. 10, pp. 62-69, 2018. (Scopus Indexed)

Harinandan Kumar, M. K. Mishra, and S. Mishra, “Laboratory Investigation of Gas Permeability and its Impact on CBM Potential”, Journal of Petroleum Exploration and Production Technology, Springer, Vol. 8, pp. 1183-1197, 2018. (Scopus ESCI, SCImago Indexed)

Harinandan Kumar, M. K. Mishra, and S. Mishra, “Effect of Permeability and Geo-mechanical Properties on Coal Matrix During CBM Production – An Overview”, Journal of Engineering Science and Technology Review, Vol. 11, pp. 160-173, 2018. (Scopus Indexed)

Muralidhar Singh M., Harinandan Kumar, K. V. Nagesha, P. Sivaiah, G. Hemath Kumar, Ajay K M, Vijaya G, “Experimental Investigation on Mechanical Properties of Glass Fibers Reinforced Composites”, Silicon, Springer, https://doi.org/10.1007/s12633-019-0078-3, 2019. (SCI Indexed)

Harinandan Kumar, M. K. Mishra, and S. Mishra, “Sorption capacity of Indian coal and its variation with rank parameters”, Journal of Petroleum Exploration and Production Technology, https://doi.org/10.1007/s13202-019-0621-1, 2019. (Scopus ESCI, SCImago Indexed)

Muralidhar Singh M., Harinandan Kumar, G. Hemath Kumar, P. Sivaiah, K. V. Nagesha, Ajay K M, Vijaya G, “Evaluation of Multilayer Thin Film Coatings for Solar Thermal Applications”, Arabian Journal for Science and Engineering. (SCI Indexed) (Accepted)

International Conferences-

Harinandan Kumar, S. Mishra, and M. K. Mishra, “Experimental Evaluation of Geo-mechanical properties of Coal using Sonic Wave Velocity”, International Conference on Advances in Agricultural, Biological & Environmental Sciences, July 22 - 23, London (UK), 2015. [Best Paper Award]

Harinandan Kumar, S. Ravi Kumar, “Keep Working after Sundown by Energy Storage from Solar Power - An Overview”, International Conference, GTEC - 2011. [Best Paper Award]
National Conferences-
Harinandan Kumar, S. Ravi Kumar, “An Innovative Approach to Save Energy in Converting Solar Power to Hydrogen Fuel” National Conference on Trend in Renewable Energy Sources, Applications & Climatic Change, July 23 - 25, 2010. [Best Paper Award]
Harinandan Kumar, S. Ravi Kumar, “A review of FSW Mechanical Property Study of Aluminum Based Composite”, Aagma - 10, NLTPC, Sept. 17 - 18, 2010. [Best Paper Award]
Harinandan Kumar, M. K. Mishra, S. Mishra, K. T. Parida, “Petrographic and Dynamic behaviour of coal for CBM production in Jharia coal field”, National Seminar on Recent Practices and Innovations in Mining Industry, NIT Raipur, Feb 19 - 20, 2016.
Harinandan Kumar, “Review of Experimental studies on Heat Transfer Augmentation”, National Conference on Development in Mechanical Engineering – An Impact on Ecology and Environment, March 09 - 10, 2013.
Harinandan Kumar, “Nitinol: A Smart Material of Advance Technology”, National Conference on Development in Mechanical Engineering – An Impact on Ecology and Environment, March 09 - 10, 2013.
Harinandan Kumar, “Effect of Process parameter of Friction Stir Welding on Macro and Microstructure of dissimilar material – An Overview”, National Conference on Process and Characterization of Materials, Dec. 07 - 08, 2012.
Harinandan Kumar, S. Ravikumar, “Metallurgical study in Friction Stir Welding for Aluminum Alloy – An Overview”, National Conference on Recent Trend in Manufacturing and Industrial Engineering, April 09 - 10, 2010.
Harinandan Kumar, S. Ravikumar, “A review of FSW microstructure studies on dissimilar Aluminum Alloys”, National Conference on Emerging Trend in Mechanical Engineering, August 09 - 10, 2010.
Harinandan Kumar, M. K. Mishra, S. Mishra, “Laboratory Investigation of Gas Permeability and its impact on CBM Production”, National Conference on Waste to Energy, Carbon Capture and Storage, August 03 - 05, 2017.

Patents Published: 07

Workshop/Seminar/Training Programme
One day workshop on New Materials and Applications at Sathyabama University, Chennai, September 2010.
One day workshop on Trends in Material Joining Technologies at Sathyabama University, Chennai, September 2011.
Three days workshop on design of experiment: An optimization tool at National Institute of Technology, Rourkela, December 2013.
Three days workshop on Multi-objective Optimization methods and Applications in Manufacturing at National Institute of Technology, Rourkela, June 2014.
Two days workshop on Aesthetics of Scientific Documentation at National Institute of Technology, Rourkela, July 2014.
Five days Executive Training Programme on Best Practice in Coalbed Methane Exploration and Production (ETP: CBM E&P 2010) at Central Institute of Mining and Fuel Research, Dhanbad, Jan. 9-13, 2017.
Three days Exhibition on Research Scholars’ Week at National Institute of Technology, Rourkela, Feb. 21-23, 2017.

Professional Membership
Member of “Institute of Doctors, Engineers and Scientists”, (2186)
Editorial Board Member of “Journal of Autonomous Intelligence”, En-press Publisher LLC., United States
Editorial Board Member of “Journal of Geological Research”, Bilingual Publishing Co., Singapore


Rewards & Recognition
Harinandan Kumar, S. Mishra, and M. K. Mishra, “Experimental Evaluation of Geo-mechanical properties of Coal using Sonic Wave Velocity”, International Conference on Advances in Agricultural, Biological & Environmental Sciences, July 22 - 23, London (UK), 2015. [Best Paper Award]
Harinandan Kumar, S. Ravi Kumar, “Keep Working after Sundown by Energy Storage from Solar Power - An Overview”, International Conference, GTEC - 2011. [Best Paper Award]
Harinandan Kumar, S. Ravi Kumar, “An Innovative Approach to Save Energy in Converting Solar Power to Hydrogen Fuel” National Conference on Trend in Renewable Energy Sources, Applications & Climatic Change, July 23 - 25, 2010. [Best Paper Award]
Harinandan Kumar, S. Ravi Kumar, “A review of FSW Mechanical Property Study of Aluminum Based Composite”, Aagma - 10, NLTPC, Sept. 17 - 18, 2010. [Best Paper Award]